The Untold Guide on How to Clean Seat Belts Like a Pro!

Seat belts, just like the best car seat cover, get such a heavy beating from both constant handling and spills. Often, they take non-stop abuse. Therefore, occasional cleaning and maintenance are essential.

More...

Just like it’s important to know how to fix cigarette burn in car seat, you must know how to clean your car’s seat belt like a pro. One of the most important things you must know when learning how to clean seat belts is that it’s highly important to maintain the strength and durability of their nylon webbing.

For effective cleaning of your seat belts, you can utilize two methods. In one method, one makes use of a pressure washer while on the other, you use your bare hands.

Before looking at the steps of the two methods on how to clean seat belts, let us first look at why your car seat belts should be clean at all times:

Why your Car Seat Belts must Always be Clean?

Car seat belts are handled frequently. They are always in the direct path of fortuitous spills. Therefore, cleaning them is mandatory.

Apart from those reasons, here are some of the other reasons you should clean your car seat belts:

  • Helps you to retain the value of your car
  • It’s handy for stain removal as well as prevention
  • Cleaning your seat belts helps to disinfect them
  • It protects them from upholstery damage
  • Cleaning them is effective at keeping allergies at bay
  • You protect the seat belts from fading, cracking and discoloration
  • It is an efficient way of removing odors

After looking at the importance of always having clean car seat belts, let’s proceed to the various methods of cleaning your seat belts.


How to Clean Seat Belts with a Pressure Washer

Are your seat belts extremely dirty? Well, if that’s the case, using a pressure washer, compared to hand, is the most effective way of cleaning your dirty belts.

If you have this equipment, then there is no doubt that this is the most efficient way of seat belt cleaning.

Items Needed

#1. Clamps

Via amazon.com

Clamps are handy at ensuring that seat belts do not retract while you’re cleaning them.


#2. Microfiber Cleaning Cloths

This serves the purpose of drying the seat belts after you clean them.


#3. Pressure Washer (with Adjustable Spray and Settings)

Via amazon.com

The pressure washer is an important accessory in this cleaning method as it provides the needed pressure to get rid of even the toughest stains.

In addition to helping you clean your seat belts thoroughly, the pressure washer can be handy for an array of other purposes. Primarily, you can use it to wash the exterior part of your car as well as clean your yard.

The following are some of the other ways you can use your pressure washer:

  • Wash your vinyl fence
  • Clean exterior brick or siding
  • Clean the garage door
  • Knock down wasp nests and spider webs
  • Clean your driveway
  • Clean your decks and patios

#4. Degreaser or Cleaner

Via amazon.com

This degreaser contains vital elements to help clean your seat belt to be as white as snow.


#5. Scrubbing Brush

Via amazon.com

A scrubbing brush is utilized for scrubbing stains present on the seat belts. You can also use the brush to clean different areas and appliances in your home. For instance, a scrubbing brush is handy when it comes to cleaning walls.


Step By Step Instructions on How to Clean Car Seat Belts

Step 1: Open the Car Door

  • Begin by opening your car door
  • Pull the seat belts out as furthest as possible.

Via e90post.com


Step 2: Remove Seat Belts

Via popsugar.com

Extend the seat belts outside of your car and then close the door. Use the clamp to hold the seat belt out firmly.


Step 3: Apply Cleaner on the Seat Belt

  • Apply your chosen degreaser or cleaner on the seat belt.
  • Allow the cleaner to rest on the belt for a minute or two before proceeding to the next step.

Step 4: Scrub Seat Belts

Use a scrubbing brush to scrub the seat belts


Step 5: Get Rid of Stains Using Pressure Washer

This is the step where the pressure washer is handy. Before using it, make sure that it’s set on a moderate or low setting of 500 – 800 dpi, roughly 1 gpm. While at it, ensure that you adjust the spray in such a way that it fans out and doesn’t spray on a direct stream.

The rule of thumb is to make sure that the spray isn’t strong enough to harm your skin in the event it comes into contact with your hands.


Step 6: Hold the Seat Belt

You can have someone hold the belt for you or hold it yourself.


Step 7: Spray the Seat Belt

Begin spraying one side first and then move on to the next. Make sure that you remove the entire cleaning product. The short and quick sprays always work best. After finishing this step, repeat it on the other side.


Step 8: Remove Moisture

Via youtube.com

A microfiber towel will be handy at this stage when it comes to getting rid of extra moisture.


Step 9: Extend the Seat Belts

Ensure that seat belts are extended completely until they are thoroughly dry. You can do this by placing a clamp adjacent the entry point in such a way that the belts won’t retract or wrap themselves around the seats.


Step 10Dry Seat Belt Using a Towel

When it comes to part of the belt that is inside the car, ensure you spread out thick layer of towels. After that, clean by utilizing the same method above.

When doing it, ensure you utilize as minimal spray as possible in order to get rid of the cleaning product.

Via ecotouch.net


Step 11: Expose Seat Belt to the Sun to Dry

You can leave the seat belts out on the sun to dry or use a dryer to dry them out.

Here’s how your final clean seat belts should look like:

Having looked at the how to clean seat belts using a pressure washer, let us now have a look at how you can do the same by hand. Read on …


How to Clean Seat Belts the Natural Way by Hand

Items Needed

#1. Small Bowl

The bowl of water hosts the mixture of water, vinegar, and liquid dish soap.


#2. Clamp

Via amazon.com

The clamp is used to prevent the seat belts from retracting while you’re cleaning them.


#3. Two Cups of Warm Water

Water is needed to mix with liquid soap and vinegar to form an efficient cleaning solution.


#4. 1/4 Cup of White Distilled Vinegar

White distilled vinegar is great at removing any kind of dirt regardless of its nature.

Via amazon.com


#5. 1 Tablespoon of Liquid Dish Soap

The liquid dish soap is effective at neutralizing the stubborn stains on your seat belts.

Via amazon.com


#6. Microfiber Cloth or Soft Towel

These towels will be handy at drying the seat belt.


Step by Step Instruction on How to Clean Car Seat Belts

  • step #1
  • STEP #2
  • STEP #3
  • STEP #4
  • STEP #5

Mix Ingredients


Via shewearsmanyhats.com

Mix vinegar, liquid dish soap, and warm water inside a mixing bowl. Vinegar is effective at getting rid of bad smell. Moreover, vinegar is a natural antibacterial meaning it keeps bacteria and mold from getting cozy on your seat belts.

Dish soap cleans your belt gently without leaving any pollutants behind.


As We Wrap Up…

Do you have small children or pets? If yes, then chances are high that your car seat belts will be gnawed on or perhaps worse. Spills and accidents are inevitable.

Consequently, knowing how to effectively clean your belt is the prudent thing to do. Fortunately, you don’t have to call a professional to handle the job for you. You can do it right at the comfort of your home’s compound or garage.

Was this guide helpful? Did you enjoy it? What was your experience of cleaning seat belt like? We would love to hear it. Feel free to share your comments, questions, or opinions in the comment section below.

About the Author Alice Brown

I am just a car girl. Simply interested in the automotive and vehicular world. I started out as an apprentice mechanic working at my father’s garage. I'm hoping my two cents will help you fix a blinking light on the dashboard or that cranking noise that you don’t seem to know where it is coming from.